Layouts

A note on circularity

Some layouts can be shown effectively both in a standard Cartesian projection as well as in a polar projection. The standard approach in ggplot2 has been to change the coordinate system with the addition of e.g. coord_polar(). This approach — while consistent with the grammar — is not optimal for ggraph as it does not allow layers to decide how to respond to circularity. The prime example of this is trying to draw straight lines in a plot using coord_polar(). Instead circularity is part of the layout specification and gets communicated to the layers with the circular column in the data, allowing each layer to respond appropriately. Sometimes standard and circular representations of the same layout get used so often that they get different names. In ggraph they’ll have the same name and only differ in whether or not circular is set to TRUE:

# An arc diagram
ggraph(graph, layout = 'linear') + 
  geom_edge_arc(aes(colour = factor(year)))

# A coord diagram
ggraph(graph, layout = 'linear', circular = TRUE) + 
  geom_edge_arc(aes(colour = factor(year))) + 
  coord_fixed()

graph <- tbl_graph(flare$vertices, flare$edges)
# An icicle plot
ggraph(graph, 'partition') + 
  geom_node_tile(aes(fill = depth), size = 0.25)

# A sunburst plot
ggraph(graph, 'partition', circular = TRUE) + 
  geom_node_arc_bar(aes(fill = depth), size = 0.25) + 
  coord_fixed()

Not every layout has a meaningful circular representation in which cases the circular argument will be ignored.

Node-edge diagram layouts

Both graphlayout and igraph provides a range of different layout algorithms for classic node-edge diagrams (colloquially referred to as hairballs). Some of these are incredibly simple such as randomly, grid, circle, and star, while others tries to optimize the position of nodes based on different characteristics of the graph. There is no such thing as “the best layout algorithm” as algorithms have been optimized for different scenarios. Experiment with the choices at hand and remember to take the end result with a grain of salt, as it is just one of a range of possible “optimal node position” results. Below is a sample of some of the layouts available through igraph applied to the highschool graph.

graph <- as_tbl_graph(highschool) %>% 
  mutate(degree = centrality_degree())
lapply(c('stress', 'fr', 'lgl', 'graphopt'), function(layout) {
  ggraph(graph, layout = layout) + 
    geom_edge_link(aes(colour = factor(year)), show.legend = FALSE) +
    geom_node_point() + 
    labs(caption = paste0('Layout: ', layout))
})

Hive plots

A hive plot, while still technically a node-edge diagram, is a bit different from the rest as it uses information pertaining to the nodes, rather than the connection information in the graph. This means that hive plots, to a certain extent are more interpretable as well as less vulnerable to small changes in the graph structure. They are less common though, so use will often require some additional explanation.

graph <- graph %>% 
  mutate(friends = ifelse(
    centrality_degree(mode = 'in') < 5, 'few',
    ifelse(centrality_degree(mode = 'in') >= 15, 'many', 'medium')
  ))
ggraph(graph, 'hive', axis = friends, sort.by = degree) + 
  geom_edge_hive(aes(colour = factor(year))) + 
  geom_axis_hive(aes(colour = friends), size = 2, label = FALSE) + 
  coord_fixed()

Focal layouts

Some layouts can put focus on a single node or a group of nodes by defining all other positions relative to that. An example of this is the focus layout, but the centrality layout is very akin to it:

ggraph(graph, 'focus', focus = node_is_center()) + 
  ggforce::geom_circle(aes(x0 = 0, y0 = 0, r = r), data.frame(r = 1:5), colour = 'grey') + 
  geom_edge_link() + 
  geom_node_point() + 
  coord_fixed()

Hierarchical layouts

Trees and hierarchies are an important subset of graph structures, and ggraph provides a range of layouts optimized for their visual representation. Some of these use enclosure and position rather than edges to communicate relations (e.g. treemaps and circle packing). Still, these layouts can just as well be used for drawing edges if you wish to:

graph <- tbl_graph(flare$vertices, flare$edges)
set.seed(1)
ggraph(graph, 'circlepack', weight = size) + 
  geom_node_circle(aes(fill = depth), size = 0.25, n = 50) + 
  coord_fixed()

set.seed(1)
ggraph(graph, 'circlepack', weight = size) + 
  geom_edge_link() + 
  geom_node_point(aes(colour = depth)) +
  coord_fixed()

ggraph(graph, 'treemap', weight = size) + 
  geom_node_tile(aes(fill = depth), size = 0.25)

ggraph(graph, 'treemap', weight = size) + 
  geom_edge_link() + 
  geom_node_point(aes(colour = depth))

The most recognized tree plot is probably dendrograms though. If nothing else is stated the height of each node is calculated based on the distance to its farthest sibling (the tree layout, on the other hand, puts all nodes at a certain depth at the same level):

ggraph(graph, 'tree') + 
  geom_edge_diagonal()

The height of each branch point can be set to a variable — e.g. the height provided by hclust and dendrogram objects:

dendrogram <- hclust(dist(iris[, 1:4]))
ggraph(dendrogram, 'dendrogram', height = height) + 
  geom_edge_elbow()

Dendrograms are one of the layouts that are amenable for circular transformations, which can be effective in giving more space at the leafs of the tree at the expense of the space given to the root:

ggraph(dendrogram, 'dendrogram', circular = TRUE) + 
  geom_edge_elbow() + 
  coord_fixed()

A type of trees known especially in phylogeny is unrooted trees, where no node is considered the root. Often a dendrogram layout will not be faithful as it implicitly position a node at the root. To avoid that you can use the unrooted layout instead.

tree <- create_tree(100, 2, directed = FALSE) %>% 
  activate(edges) %>% 
  mutate(length = runif(n()))
ggraph(tree, 'unrooted', length = length) + 
  geom_edge_link()

Often unrooted trees have a branch length attached - this can be passed to both the dendrogram and unrooted layout to determine the length of each edge.

Matrix layouts

Many node-edge diagram layouts suffer from poor scalability, where edges will eventually begin to overlap to the extend that the plot becomes unintellible. One way to combat this is by only plotting subsets of the larger plot, but another approach is to choose a layout that avoids overlapping edges altogether. The matrix layout places each node on a diagonal and draws edges by drawing points or tiles at the intersection of the vertical and horizontal position of its terminal nodes. Using matrix layouts efficiently requires that you begin to recognise the specific patterns that different network topologies gives rise to. Further, it is important to recognise the large effect that the node order has on the look of the matrix layout:

graph <- create_notable('zachary')
ggraph(graph, 'matrix', sort.by = node_rank_leafsort()) + 
  geom_edge_point(mirror = TRUE) + 
  coord_fixed()

ggraph(graph, 'matrix', sort.by = node_rank_spectral()) + 
  geom_edge_point(mirror = TRUE) + 
  coord_fixed()

Fabric layouts

Another special layout that promises scalability is the biofabric layout (here named fabric to avoid it being ignored for non-biological networks). The fabric layout is special in that it positions nodes evenly spaced on the y-axis and then draws edges as vertical (and by extension, parallel) lines evenly separated as well, connecting the nodes. Nodes are drawn as horizontal lines spanning the extent of the edges that departs from it. As with matrix layouts the node ordering have a huge impact on the final look and interpreting the plot may take some getting used to.

ggraph(graph, 'fabric', sort.by = node_rank_fabric()) + 
  geom_node_range(colour = 'grey') + 
  geom_edge_span(end_shape = 'square') + 
  coord_fixed()

Fabric layouts allow something called shadow edges where all edges are duplicated to make it easier to follow all edges originating from each node.

ggraph(graph, 'fabric', sort.by = node_rank_fabric(), shadow.edges =TRUE) + 
  geom_node_range(colour = 'grey') + 
  geom_edge_span(aes(filter = shadow_edge), colour ='lightblue' , end_shape = 'square') + 
  geom_edge_span(aes(filter = !shadow_edge), end_shape = 'square') + 
  coord_fixed()